As a responsible homeowner, you always have a lot on your to-do list. It seems as though there’s always another home repair or maintenance project for you to consider.
You’re not alone in that feeling, either. Consider the following statistic regarding homeowners throughout the United States. It indicates that, on average, homeowners spend around one to four percent of the home’s overall value on improvement projects every single year.
In other words, it’s understandable to feel obligated to spend money on repairs or maintenance. If you’re wondering about how to install a bathroom sink, you’re in luck. The good news is that you’ve come to the right place by reading this article.
Following are all the details you need to know about how to install a bathroom sink by yourself. Watching YouTube videos is only part of the process, after all. Read on to prepare yourself for this project.
To Start, Evaluate the Costs and Your Available Budget
Of course, the first thing for you to consider is what kind of bathroom sink installation this is going to be. At this point, you’ve already decided it’s going to be a do-it-yourself (DIY) project. You want to avoid hiring outside labor since you trust yourself to handle this alone.
First, you need to think about how much you’re willing to spend on this home improvement project. Are you prepared to handle the cost of tools and supplies? Are you willing to dip into your savings account if this is an emergency repair project?
Then, take the time to research which kind of bathroom sink you want to install. One example is to invest in a sleek vessel sink for your bathroom. No matter what your ideal aesthetic is, order your bathroom sink to get started on the rest of the project.
In addition, there are a few key tools you’ll need to either buy or borrow to get started. These include things like plumbers’ wrenches, caulking, a putty knife, a set of plumbing sockets, and the new sink installation kit itself. If these are going to be expensive for you, you’ll need to figure out how to finance this project soon.
Shutting off the Water Is the Beginning of How to Install a Bathroom Sink
This step is of particular importance when you’re ready to install your new bathroom sink. Otherwise, you run the risk of spilling water all throughout your home when you disconnect the existing sink.
If you don’t know where your home’s water supply is accessed, take the time to locate it. Then, inform the rest of the household occupants that you’re going to disconnect the water for some time. You’ll let them know when it’s back up and running again.
Once you turn the water off, head back up to the bathroom where you’ll be installing the new sink. It’s time to get your hands dirty.
Detach the Original Sink with Care
One of the most challenging parts of this process is going to be removing the original sink. This is where your putty knife will come into play.
Use the putty knife to remove any old caulking surrounding the existing drainage pipes of your sink. Then, you’ll use a wrench to pry that drain away from the wall. Be sure to have a small bucket and some towels nearby in case of some water leakage.
When you’ve removed that sink, set it aside with care. You don’t want to damage it in case you can sell it again to an interested buyer. It’s fortunate that there are a variety of online resources available to help you sell it nearby, too.
Bring the New Sink into Position
Once the old sink is out of the way, bring the new sink and its installation kit to the area. Put the new sink into position and start installing the new drain pipes.
In addition, by the way, you’ll have to decide what new faucet you’ll want for your sink. This is true, in particular, if you don’t like the faucet that comes with an installation kit. You deserve to have a sink faucet that matches the aesthetic design of the rest of your bathroom.
Turn the Water Back on and Check for Leaks
The last step for you to remember is a crucial one. If you get everything connected only to turn the faucet handle and find no water, you’ve forgotten a step. Turn the house’s water back on, of course!
That’s not the last thing you’ll need to do, though. As soon as you turn the water= on again, run back up to the bathroom with the new sink.
Are there any leaks you can spot? If not, turn the faucets on and check again. If there are leaks, you’ll need to turn the house’s water back off and locate the problem.
Once you’re assured, there’s no leakage, congratulations. You have successfully managed to install a bathroom sink by yourself. All you have to do now is clean up.
Continue to Invest in Your Home and Your Quality of Life
At this point in the article, you have a thorough understanding of how to install a bathroom sink. There’s no need to cut corners when it comes to investing in your home’s overall value. That’s why you’ll take the above guidelines seriously.
After all, you deserve the peace of mind that comes from knowing you’re making the most of your investment in your home. Don’t underestimate the value of undertaking home improvement projects every now and then.
Of course, it can be challenging to navigate the ins and outs of home improvement alone. That’s why it’s worthwhile to continue to keep yourself informed of all of the latest trends and practices.
In fact, that’s where this website can come into play. We prioritize bringing our readers the top advice concerning home care and other lifestyle habits.
For that reason, we encourage you to browse through the rest of our website today. In our blog articles, you’ll find the latest and greatest tips and tricks to make the most of the quality of the rest of your life.